All products > Gloves >

Nitrile Disposable Gloves (Box of 100)

Description

Blue nitrile gloves (Box of 100) are resistant to tears, cuts and abrasion. 4mil thick textured fingertips offer enhancing dexterity and grip. Beaded cuffs add an extra layer protection and helps when pulling gloves on. Nitrile gloves are essential when working with oils and greases or as an alternative to latex. Powder free, latex free, food safe and AQL 1.5 medical grade.

This product is suitable for tasks such as inspection, decorating, engineering, cleaning and more.

EN ISO 21420, EN ISO 374-1, EN ISO 374-5

Textured fingertips
Beaded cuff
Powder Free
Latex Free
AQL 1.5 medical grade
Food Safe
Box of 100

Price

List Price ex.VAT	£9.99
List price inc.VAT	£11.99

€ £

Sizing

Code
SCAGLODNM	M (8)	Box of 100
SCAGLODNL	L (9)	Box of 100
SCAGLODNXL	XL	Box of 100

Find a Stockist

Certification

View Certificate	Medical Directive EU Declaration of Conformity EN ISO 13485 :2016, EN ISO 14971 :2019,EN 1041 :2008,EN ISO 15223-1 :2016, EN 455-1:2020, EN 455-2:2015, EN 455-3:2015, EN 455-4: 2009
View Certificate	Medical Directive UK Declaration of Conformity EN ISO 13485 :2016, EN ISO 14971 :2019,EN 1041 :2008,EN ISO 15223-1 :2016, EN 455-1:2020, EN 455-2:2015, EN 455-3:2015, EN 455-4: 2009
View Certificate	EU Declaration of Conformity EN ISO 21420:2020, EN ISO 374-1:2016+A1:2018, EN ISO 374-5:2016
View Certificate	UK Declaration of Conformity EN ISO 21420:2020, EN ISO 374-1:2016+A1:2018, EN ISO 374-5:2016

Standard EN ISO 21420

The EN 420 standard was revised in March 2020 becoming standard EN ISO 21420: 2020.

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc.

Standard EN388:2016

Providing protection for mechanical risks.

This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing, puncture and impact.

EN388 Example
2 = Abrasion Rating 1-4
1 = Blade Cut Rating 1-5
2 = Tear Rating 1-4
1 = Puncture Rating 1-4
= 2nd Cut Rating A-F
P = Impact P Pass or Fail

Protection against mechanical risks is expressed by a pictogram followed by a number rating representing test performance against a specific risk. The performance level is from 1-5, where 4 or 5 is the best result. X = not tested. P = Impact test passed.

The level of performance is based on the number of cycles/force required to penetrate the sample.

Abrasion resistance: based on the number of cycles required to abrade through the sample glove.

Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed.

Tear resistance: based on the amount of force required to tear the sample.

Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point.

2nd Cut resistance: based on the number of cycles required to cut through the sample.

Impact protection: the area of protection is secured over a domed anvil and is impacted at an impact energy of 5J.