Gloves
Impact Cut D Glove - Nitrile Palm
Cut F Glove - Nitrile Palm
Cut D Glove - PU Palm
3 Piece Winter Workwear Kit
Nitrile Disposable Gloves Heavy-Duty (Box of 100)
Nitrile Disposable Gloves (Box of 100)
Thermal Waterproof Latex Gloves
4144X
Gardeners Gauntlets - 40cm (16in)
Vinyl Gloves (Box of 100)
4131X
Breathable Nitrile Micro-Foam Gloves
3101X
Nitrile Gauntlets with Flock Lining
3121X
Black PU Coated Gloves
Gripper Gloves with PVC Webbing Palm
Canadian Rigger Cowsplit Leather Gloves
Heavy-duty Rigger Cowsplit Leather Gloves
2141X
Knitshell Latex Palm Gloves - Orange
3142X
Knitshell Thermal Latex Coated Gloves - Orange
4542C
Grey PU Coated Cut 5 Gloves
2121X
Latex Foam Gloves - Hi-Vis Yellow
2121X
Latex Foam Gloves - Hi-Vis Orange
4121X
Nitrile Coated Knitted Gloves - Red
4121X
Nitrile Coated Inspection Gloves (12 Pairs)
Natural Latex Examination Gloves (Box of 100)
3121X
PVC Knitwrist Cotton Gloves - Red
4111X
Nitrile Knitwrist Heavy-Duty Gloves - Blue
3121X
PVC Gauntlet Gloves 27cm - Red
3121X
PVC Gauntlet Gloves 45cm - Red
4144X
Welders Gauntlet - Red
2131X
Waterproof Gloves with Latex Palm
Work Gloves with Touch Screen Function
3542BP
Anti-Impact Latex Cut 5 Gloves
4341A
Grey PU Coated Cut 3 Gloves
3121X
Max Dexterity Nitrile Gloves
3121X
White PU Coated Gloves - Size 9 (12 Pairs)
112XX
Vibration Resistant Latex Foam Gloves
Filter Products |
|
| Disposable | |
| Gauntlets | |
| Hi-Vis | |
| Latex | |
| Nitrile | |
| Polyurethane | |
| PVC | |
| Rigger | |
Glove Selection Guide
Scan provide a range of gloves for protecting the hands with emphasis on the needs of workers in commercial industries where the combination of good protection and user comfort are main requirements.
Standard EN ISO 21420
The EN 420 standard was revised in March 2020 becoming standard​ EN ISO 21420: 2020​.
This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc.
Standard EN388:2016
Providing protection for mechanical risks.This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, tearing, puncture and impact.
1 = Abrasion Rating 1-4
1 = Blade Cut Rating 1-5
2 = Tear Rating 1-4
X = Puncture Rating 1-4
X = 2nd Cut Rating A-F
P = Impact P Pass or Fail
Protection against mechanical risks is expressed by a pictogram followed by a number rating representing test performance against a specific risk. The performance level is from 1-5, where 4 or 5 is the best result. X = not tested. P = Impact test passed.
The level of performance is based on the number of cycles/force required to penetrate the sample.
 |
Abrasion resistance: based on the number of cycles required to abrade through the sample glove. |
 |
Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed. |
 |
Tear resistance: based on the amount of force required to tear the sample. |
 |
Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point. |
 |
2nd Cut resistance: based on the number of cycles required to cut through the sample. |
 |
Impact protection: the area of protection is secured over a domed anvil and is impacted at an impact energy of 5J. |